Double vane pump 2520V 10A11 1CC 22R model list

1.2520V double vane pump 2520V 10A11 1CC 22R main parameters are as follows:

Displacement: The displacement of this vane hydraulic pump is 10ml/rev 1.

Pressure: Maximum operating pressure is 210 bar (3000 psi).

Efficiency: Provides more than 90% volumetric efficiency at an operating pressure of 210 bar.

Noise: Noise level as low as 62 dB(A).

Design: The double vane pump design provides long life, high productivity and application flexibility.

Application: Suitable for various industrial purposes, especially where high efficiency and low noise are required.

2. The working principle of 2520V double vane pump is as follows:

Double pump: The stator surface consists of eight parts: two long radius arcs, two short radius arcs and four transition curves, and the stator and rotor are concentric. When the rotor rotates clockwise, the volume of the sealed working chamber gradually increases at the upper left corner and the lower right corner, which is the oil suction area; it gradually decreases at the lower left corner and the upper right corner, which is the oil pressure area. For each rotation of the rotor of this hydraulic oil pump, each sealed working chamber completes the oil suction and oil pressure actions twice, which is called a double-acting vane pump.

3. Application scenarios:

The 2520V double hydraulic pump is suitable for a variety of industrial uses, especially where high efficiency and low noise are required. Its compact design and low noise characteristics make it an excellent performer in the most demanding industrial environments.