EDG-01-B, EDG-01-C, EDG-01-H Series Relief Valve Instructions
1. Product Overview
EDG-01 series relief valve is an electro-hydraulic proportional control pilot valve that can adjust the system pressure proportionally according to the input current. This series of valves has the characteristics of high sensitivity, fast response speed, good stability, etc., and can meet various complex and sophisticated hydraulic control needs.
2. Product Features
High-precision control: EDG-01 series relief valve adopts advanced electro-hydraulic proportional control technology, which can achieve high-precision pressure regulation and meet the occasions with high pressure control accuracy requirements.
High reliability: This series of valves are made of high-quality materials and precision processing technology, with good durability and reliability, and can operate stably for a long time.
A variety of models are available: EDG-01 series provides models with a variety of diameters and pressure levels. You can choose the appropriate model according to actual application requirements.
3. Installation and Use
Installation: When installing the EDG-01 series hydraulic valve, ensure that the installation location is clean and dry to prevent oil and impurities from entering the valve. At the same time, select the appropriate model according to the system pressure requirements and install it according to the installation requirements in the product manual.
Wiring: The wiring of the valve should be correct to avoid wrong connection or short circuit. At the same time, the power supply should be stable and reliable to avoid the normal operation of the valve being affected by power supply problems.
Debugging: During the debugging process, the appropriate input current and pressure range should be set according to the system requirements, and the response and stability of the valve should be observed. If there is any abnormality, it should be checked and eliminated in time.
4. Maintenance and care
Regular inspection: The EDG-01 series hydraulic control valve should be inspected regularly, including appearance inspection, wiring inspection, pressure test, etc., to ensure that it is in good working condition.
Cleaning and maintenance: Cleaning and maintenance of the valve is also very important. The oil and impurities on the surface of the valve body should be cleaned regularly to avoid affecting the performance of the valve.
Replace wearing parts: If the valve seals, springs and other wearing parts are found to be severely worn or ineffective, they should be replaced in time to ensure the normal operation of the valve.
5. Notes
Avoid overload: During use, the valve should be prevented from being subjected to excessive pressure or current to avoid damage to the valve.
Prevent shock: When starting or shutting down the system, try to avoid excessive impact on the valve to avoid affecting its performance and life.
Correct operation: The valve should be operated and maintained strictly in accordance with the operating requirements in the product manual to avoid problems caused by improper operation.