pv2r24-59-184, pv2r24-59-153 double vane pump parameter manual

PV2R series vane pumps are low-noise hydraulic oil pumps designed for high pressure and high performance. This series of double vane pumps adopts a double design, which can meet the needs of two hydraulic circuits at the same time, greatly improving the system's integration and operating efficiency. The PV2R series vane pumps have flexible installation types, including base installation type (L) and flange installation type (F), which can adapt to different installation environments.

Serial number and model

Series No.: PV2R series hydraulic pump

Model: PV2R24-59-184 and PV2R24-59-153

Pump displacement

Both pumps are large displacement models in the PV2R series, but the specific displacements are different:

PV2R24-59-184: Maximum theoretical displacement is 184 cm³/rev, speed range is 600～1800, maximum working pressure is 210 kgf/cm².

PV2R24-59-153: The maximum theoretical displacement is 153 cm³/rev, the speed range is 600～1800, and the maximum working pressure is also 210 kgf/cm².

Installation form

Both vane oil pumps are available with flange mounting and foot mounting.

Direction of rotation

Direction of rotation: The standard direction of rotation for both pumps is clockwise (R), viewed from the pump shaft end.

Direction of oil discharge port and oil suction port

Discharge direction: The standard discharge direction for both pumps is upward (A), but other directions (B, R, L) can be selected according to requirements.

Oil suction port direction: The standard oil suction port direction is also upward (A), and the position can also be adjusted according to specific needs.

Materials and performance

Material: The pump body is usually made of cast iron, which is wear-resistant and has high mechanical strength.

Performance: Both hydraulic pumps are wear-resistant, low-noise, and have high pressure stability, making them suitable for long-term high-load operation.

Design number and origin

Design number: The design number of the two pumps may be different and can be found on the product label or in the technical manual.

Application Areas

PV2R24-59-184 and PV2R24-59-153 double vane pumps are particularly suitable for industrial equipment with high requirements for hydraulic flow and pressure, such as injection molding machines and die-casting machines, due to their large displacement and high performance. The double design not only improves the system integration, but also reduces the complexity of installation and maintenance, making it an ideal choice in hydraulic systems.

pv2r24-65-136    pv2r24-59-237    pv2r24-59-200
pv2r24-59-184    pv2r24-59-153    pv2r24-59-136
pv2r24-53-237   pv2r24-53-200    pv2r24-53-184

pv2r24-53-153    pv2r24-53-136    pv2r24-47-237
pv2r24-47-200    pv2r24-47-184    pv2r24-47-153
pv2r24-47-136