PV2R3-94-F-RAA-41, PV2R3-116-F-RAA-41 vane pump model description and parameters
The vane pump PV2R series is a high-pressure and low-noise hydraulic vane pump product, which is widely used in various hydraulic systems. The following are the detailed descriptions and parameters of the two models PV2R3-94-F-RAA-41 and PV2R3-116-F-RAA-41:
1. Model Description
PV2R3-94-F-RAA-41 Vane Pump
PV2R3: Indicates that the pump belongs to the PV2R series.
94: Indicates the nominal displacement of the pump in cm³/rev.
F: Indicates the installation method, F stands for flange installation.
R: Indicates the rotation direction of the pump, R stands for clockwise.
A: Indicates the direction of the pump's oil discharge port, A stands for upward.
A: Indicates the direction of the pump's oil suction port, A stands for upward.
41: Indicates the design number.
PV2R3-116-F-RAA-41
Similar to PV2R3-94-F-RAA-41, except for the displacement of 116.
2. Parameters
The following are some of the main parameters of the two vane oil pumps, but please note that the specific parameters may vary slightly due to factors such as product batches and manufacturers.
PV2R3-94-F-RAA-41 Vane Pump
Displacement: According to the "94" in the model, the theoretical displacement of this vane oil pump is 93.6 cm³/rev.
Direction of rotation: clockwise (from the direction of the oil pump shaft end).
Outlet position: top (from the shaft end).
Suction port position: top (from the shaft end).
Mounting method: flange mounting.
Other parameters: such as pressure, flow, efficiency, etc., please refer to the specific product manual or technical documents.
PV2R3-116-F-RAA-41
Displacement: According to the "116" in the model, the theoretical displacement of this vane oil pump is 115.6 cm³/rev.
Rotation direction: clockwise (from the direction of the oil pump shaft end).
Output port position: top (from the shaft end).
Inlet port position: top (from the shaft end).
Installation method: Flange installation.
Other parameters: Please refer to the specific product manual or technical documentation.
3. Notes
When using the PV2R3 vane pump, ensure the cleanliness of the hydraulic system to avoid damage to the vane pump due to oil contamination.
Regularly check the oil inlet and return filter devices in the hydraulic system to ensure good filtering effect.
When selecting hydraulic oil, the appropriate hydraulic oil should be selected according to the requirements of the pump and the working environment of the system.
When installing and disassembling the pump, relevant operating procedures and safety regulations should be followed to ensure correct and safe operation.
In summary, PV2R3-94-F-RAA-41 and PV2R3-116-F-RAA-41 are two hydraulic pump products with excellent performance and wide application. When using them, you should fully understand their model descriptions and parameters, and follow relevant operating procedures and safety regulations to ensure their normal operation and extend their service life.