T7EE-085-054-2R00-A10-MD-R9 Servo Vane Pump Instructions
Guangdong Yihe Hydraulic Technology Co., Ltd. is a world-leading manufacturer of hydraulic pumps and hydraulic components. Its T7EE-085-054-2R00-A10-MD-R9 vane pump is a high-performance, reliable and durable hydraulic power component, which is widely used in various industrial machinery and automation systems. This instruction manual is intended to provide users with detailed operating guidelines, installation steps, maintenance precautions and troubleshooting methods to ensure that users can use the product correctly and safely.
Key Features:
High efficiency, low noise design
Multiple mounting interface options (SAE/Metric)
Adjustable displacement design to meet different working conditions
Installation Guide:
1.Preparation before installation
Ensure that the working environment is clean and free of impurities to prevent impurities from entering the pump body.
Check that the pump and accessories are complete and free of damage.
Confirm that the system oil is clean and the viscosity meets the requirements (generally between 17 and 37 mm²/s).
2.Installation steps
Installation location selection: Select a stable, vibration-free location to install the vane pump and ensure that the pump body is placed horizontally.
Connect the oil port: According to the interface size of the oil pump (SAE or metric), use appropriate pipes and connectors to connect the oil inlet and outlet. Note that the oil port layout is consistent with the pump body markings.
Fix the pump body: Use bolts to fix the pump body to the foundation, and ensure that the tightening torque meets the standards.
Electrical connection: If the pump is equipped with a motor, connect the power supply correctly according to the motor manual and check that the motor rotation direction is consistent with the pump body marking (clockwise or counterclockwise).
3.Debugging and trial operation
Before starting, manually rotate the pump shaft to ensure that there is no obstruction.
Start the system, gradually increase the load, and observe the operation of the pump and all parts of the system to ensure there is no abnormal vibration, noise or leakage.
Monitor oil temperature and pressure to ensure they are within normal operating range.
Use and maintenance:
1.Precautions for use
It is strictly forbidden to operate the pump without oil or with insufficient oil to prevent dry-running damage.
Check the oil cleanliness regularly and replace seriously contaminated oil in time.
Avoid overloading the pump for a long time to prevent overheating and damage.
2.Maintenance and care
Check the tightness of the hydraulic pump body and accessories regularly, and tighten them in time if they are loose.
Check whether the oil seal and sealing parts are intact and replace them in time if there is any leakage.
Clean the inside of the pump body regularly, especially the inner surface of the stator and the oil distribution plate, to remove impurities caused by wear.
If you need to replace the blades or rotor, make sure the new parts match the original specifications and are assembled in the correct sequence.
Troubleshooting
Common faults and solutions
Pump overheating:
Check whether the oil is sufficient and the viscosity is appropriate.
Check whether the system load is too large and reduce the load appropriately.
Check whether the cooling system is working properly.
Excessive noise:
Check whether the pump body is tight and loose.
Check whether the oil is clean and has no impurities.
Check whether the blades, rotors and oil distribution plates are severely worn and replaced if necessary.
Leakage:
Check whether the seals are aged or damaged and replace them in time.
Check whether the connecting pipes and joints are tight and loose.