YUKEN type vane pump PV2R3-66FR
1. Interpretation of basic models
PV2R3: Indicates that the vane pump belongs to the PV2R3 series.
66: Indicates the nominal displacement of the hydraulic pump in cm³/rev.
F: Indicates the installation type of the oil pump. F means that the oil pump is flange-mounted.
R: Indicates the rotation direction of the vane pump. R means that the vane pump rotates clockwise.
2. Performance characteristics
Pressure: The rated pressure of PV2R3 series vane pumps is usually higher, up to 210kgf/cm². Therefore, it is possible for the PV2R3-66FR vane pump to work at a pressure of 21MPa, but you need to consult the specific product manual of the model or contact the manufacturer to confirm its maximum working pressure.
Displacement: The main pump displacement is 66cm³/rev, which determines the output flow and efficiency of the pump.
Speed: It can be adjusted within a certain range to meet different hydraulic system requirements. The specific speed depends on the matching of the motor and the hydraulic system.
Noise: PV2R series vane pumps are designed for low-noise working environments, with the remarkable features of reasonable structure, good reliability, minimal pulsation, etc. The stator transition curve adopts a high-order curve design, which effectively reduces the noise level of the pump.
Application scope: Widely used in hydraulic systems of metal cutting machine tools, injection molding machines, die-casting machines, engineering machinery, aerospace, petrochemical, metallurgy and mining industries.
3. Precautions
When using the PV2R3-66FR vane pump, please ensure that you comply with the relevant safety operating procedures and maintenance requirements to ensure its normal operation and extend its service life.
Check the pump for wear regularly and replace worn parts in time to maintain optimal pump performance.
Pay attention to the cleanliness of the hydraulic system to prevent impurities and contaminants from entering the pump, which will affect the pump's working efficiency and life.
In summary, it is possible for the YUKEN type PV2R3-66FR vane pump to operate at 21MPa pressure, but you need to consult the specific product manual of this model or contact the manufacturer to obtain the most accurate performance parameters and usage guidelines.