Daikin Type V8A1RX-95 Hydraulic System Piston Pump
Brand: YIHE
Product origin: China
Delivery time: 10-30days
Supply capacity: 300pcs/day
Model: V8A1RX-95
Max Displacement: 8 cc/rev
Max Working Pressure: 35 Mpa
Shaft Speed Range: 600-3000 r/min
Rotation: Right from shaft end
Product Type: Piston pump
Daikin Type V8A1RX-95 Hydraulic Piston Pump
Precautions
Mounting
When installing the pump the filling port should be positioned upwards.
Alignment of Shaft
Employ a flexible coupling whenever possible, and avoid any stress from bending or thrust.
Maximum permissible misalignment is less than 0.1 mm TIR and maximum permissible misangular is less than 0.2°.
Suction Pressure
Permissible suction pressure at inlet port of the pump is between -16.7 and +50 kPa .
For piping to the suction port, use the pipes of the same diametre as that of the specified pipe flange to be used.
Make sure that the height of the pump suction port is within one metre from the oil level in the reservoir.
Hints on Piping
When using steel pipes for the suction or discharge ports, excessive load from the piping to the pump generates excessive noise.
Whenever there is fear of excessive load, please use rubber hoses.
Suction Piping
In case the pump is installed above the oil level, the suction piping and suction line filter should be located lower than the pump position to prevent air in the suction line.
Drain Piping
Install drain piping according to the chart and ensure that pressure within the pump housing should be maintained at a normal pressure of less than 0.1 MPa and surge pressure of less than 0.5 MPa.
Length of piping should be less than 1 m, and the pipe end should be submerged in oil.
In case AR16 and AR22 pump, a screw-in torque of fitting is 40 to 50 Nm. Do not apply bending and thrust torque to the fitting.
Bleeding Air
It may be necessary to bleed air from pump case and outlet line to remove causes of vibration.
Product information
| Brand | YIHE | Series | V8A1RX |
| Model | V8A1RX-95 | Product type | Piston pump |
| Delivery time | 10-30 days | Warranty period | 365 day |
| Material | cast iron | Supply capacity | 300 Pcs/Day |
| Product origin | China | Max Displacement | 8 cc/rev |
| Max Working Pressure | 35 Mpa | Shaft Speed Rang | 600-3000 r/min |
Product detail presentation
Continuous pressurization, stable quality
Efficient output, long life
Durable and responsive
Pressure and impact resistance, high strength pump core
Product details
| Specifications | |||||||
| Model No. | Theoretical discharge rate cm3/rev | Maximum operating pressure MPa {kgf/cm2} | Permissible rotational speed min-1 | Discharge rate adjustment range 1800 min-1 L/min | Mass (Control method A) KG | ||
| Axial port | Side port | Axial port | Side port | ||||
| V8 | 8.0 | 7{ 70} | 500 to 1800 | 2 to 14.4 | — | 8.9 | |
| V15 | 14.8 | 21 {210} | 500 to 1800 | 4.5 to 26.6 | 7.5 to 26.6 | 12.8 | 14.5 |
| V15 (Type Y) | 14.8 | 7{ 70} | 500 to 1800 | 4.5to 26.6 | 13.5 | ||
| V23 | 23.0 | 25 {250} | 500 to 1800 | 12 to 41.4 | 18.4 | 21.5 | |
| V38 | 37.7 | 25 {250} | 500 to 1800 | 34 to68 | 36.5to 68 | 24.4 | 26 |
| V50 | 51.6 | 21 {210} | 500 to 1800 | 0 to 93 | — | 50 | |
| V70 | 69.8 | 21 {210} | 500 to 1800 | 13 to 126 | — | 55 | |
| Model overview | ||||||||||||
| Model | Piping connection direction | control direction | ||||||||||
| A | A-RC | CH | CH-RC | CJ | CJ-RC | D | D-RC | SA | SAJS | |||
| V series | V8 | side port | R | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ |
| V15 | side port | R(L) | R(L) | R | R | R | R | R | R | R(L) | ﹣ | |
| Axial port | R(L) | R(L) | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | R(L) | ﹣ | ||
| V23 | side port | R(L) | R(L) | R | R | R | R | R | R | R(L) | R | |
| Axial port | R(L) | R(L) | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | R(L) | ﹣ | ||
| V38 | side port | R(L) | R(L) | R | R | R | R | R | R | R(L) | R(L) | |
| Axial port | R(L) | R(L) | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | R(L) | ﹣ | ||
| V50 | side port | R(L) | R(L) | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | R(L) | R(L) | |
| V70 | side port | R(L) | R(L) | R | ﹣ | ﹣ | ﹣ | ﹣ | ﹣ | R(L) | R | |
FAQ
Q1:Can you ship the goods to our country?
A:Yes, you can choose express (DHL/UPS/FEDEX/EMS/ARAMEX/TNT) and by air, by sea to most countries.
Q2:Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q3: Are you trading company or manufacture?
A: We are factory
Q4: How long is your delivery time?
A: Gernally it is 1-2days if the goods are in stock.It is 5-7days if the goods no stock.It is subject to order quantity.
Q5: Do you provide sample,Is it free or extra?
A: We are willing to provide samples to test quality first, it is not for free because it is high value products. But sample cost can return in bulk order.
Q6: What is the terms of payment?
A: 100% deposit or 30% deposit, 70% before shippment.
Q7: How long is the warranty?
A: We offer 12 months warranty.
Q8:How do you make our business long term and good relationship?
A:1. We will ensure the interests of our customers with good quality and competitive price; 2. We treat every customer as a friend and sincerely do business with everyone and make friends, no matter where they are from.
