Double vane pump 2520V-10A11-1CC-22R model list

The main parameters of 2520V-10A11-1CC-22R are as follows:

Displacement: The maximum geometric displacement of this double vane pump is 35.0 cm³/r.

Pressure: The maximum working pressure of this hydraulic pump is 207 bar.

Efficiency: Provides more than 90% volumetric efficiency at an operating pressure of 207 bar.

Noise: Noise level as low as 62 dB(A).

Design: The double vane pump design provides long life, high productivity and application flexibility.

Application: Suitable for various industrial purposes, especially where high efficiency and low noise are required.

Working principle:

Double pump: The stator surface consists of eight parts: two long radius arcs, two short radius arcs and four transition curves, and the stator and rotor are concentric. When the rotor rotates clockwise, the volume of the sealed working chamber gradually increases at the upper left corner and the lower right corner, which is the oil suction area; it gradually decreases at the lower left corner and the upper right corner, which is the oil pressure area. For each rotation of the rotor of this pump, each sealed working chamber completes the oil suction and oil pressure actions twice, which is called a double-acting vane pump.

Application scenarios:

The 2520V double vane pump is suitable for a variety of industrial uses, especially where high efficiency and low noise are required. Its compact design and low noise characteristics make it perform well in the most demanding industrial environments.