How to maintain and maintain the hydraulic pump
01.Daily inspection of product fasteners
Such as: whether the screws are loose, check whether there is oil leakage at the installation pipeline interface, etc.
02.Check the cleanliness of the oil seal
It is often necessary to clean the oil seal to prevent affecting the service life of the machine.
03.It is recommended to replace the hydraulic oil after the first 500 hours of operation. The maximum replacement cycle of hydraulic oil is 2000 hours, and the maximum replacement cycle with air filter is 500 hours.
04.In order to optimize the service life of the hydraulic components, please replace the hydraulic oil and filter regularly. Hydraulic contamination is the main cause of damage to hydraulic components. Please keep the hydraulic oil clean during daily maintenance and repair.
05.In daily use, check whether the level of the hydraulic oil tank meets the requirements, and check the water content of the hydraulic oil and whether there is any abnormal smell. When the hydraulic oil contains water, the oil will be turbid or milky, or there will be water droplets at the bottom of the oil tank. When the oil has a foul smell, it indicates that the working temperature of the hydraulic oil is too high. When the above situation occurs, please replace the hydraulic oil immediately, and at the same time find out the cause of the problem and solve it. Check your vehicle daily for leaks. 6. During trial operation and operation, the axial piston pump components must be filled with hydraulic oil and exhausted. Filling and bleeding operations are required after a prolonged shutdown as the system may drain oil through the hydraulic lines.
06.During trial operation and operation, the axial piston pump elements must be filled with hydraulic oil and exhausted. Filling and bleeding operations are required after a prolonged shutdown as the system may drain oil through the hydraulic lines.
07.Pollution can cause fatal damage to hydraulic components, and the working environment for maintenance and repairs must be kept clean. Thoroughly clean the pump or motor before starting maintenance or repairs.
08.Regularly replace the hydraulic oil and filter of the system according to the recommended standards to ensure the efficient and safe operation of the system, and replace the vulnerable parts regularly.