PV2R13-19-76-F-RAAA-41 vane pump model description and parameters

1. PV2R13-19-76-F-RAAA-41 vane pump model description

PV2R13-19-76-F-RAAA-41 is a specific vane pump model that follows certain naming conventions to identify its features, functions, and design. Below is a detailed explanation of the various parts of this model:

PV2R13: represents the serial number of the oil pump.

19: represents the small displacement pump of this duplex pump, nominal displacement (cm³/rev).

76: Represents the large displacement pump of this pump, nominal displacement (cm³/rev).

F: Indicates the installation form of the oil pump, F is the flange installation form, and L is the tripod installation form.

R: Rotation direction, R is clockwise from the shaft end, which is the standard form, and L is counterclockwise.

A: The direction of the oil discharge port of the small displacement pump, from the shaft end, A is upward, which is the standard form, B is downward, R is right, and L is left.

A: The direction of the oil discharge port of the small displacement pump, from the shaft end, A is upward, which is the standard form, B is downward, R is right, and L is left.

A: The direction of the oil suction port, from the shaft end, A is upward, which is the standard form, B is downward, R is right, and L is left.

41: This number represents the design code of this double vane pump.

2. PV2R13-19-76-F-RAAA-41 vane pump parameters

Displacement: This is the volume of liquid that the pump can deliver per revolution, usually expressed in ml/rev or cc/rev. For this model pump, the displacement should be 13.

Working pressure: The working pressure range or maximum working pressure of the pump, usually expressed in megapascals (MPa) or bar. 19 may indicate the working pressure rating or maximum working pressure of the pump.

Speed Range: The normal operating speed range of the pump, usually expressed in revolutions per minute (rpm).

Drive mode: The drive mode required for the pump, such as motor drive, engine drive, etc.

Medium characteristics: the type of medium that the pump can transport, temperature range, viscosity range, etc.

Structural dimensions: overall dimensions, weight, interface dimensions, etc. of the pump.

Control method: The control method of the pump, such as manual control, automatic control, frequency conversion control, etc.

These parameters are crucial for the correct selection and use of the pump, so when selecting and using the PV2R13-19-76-F-RAAA-41 vane pump, be sure to carefully consider and consult the relevant parameter information. At the same time, it is also recommended to consult professionals or manufacturers for more detailed and accurate information based on specific needs and usage environment in actual applications.