YUKEN type pv2r33-52-60 double vane pump parameter manual and instructions for use
1. Product Overview
YUKEN Type PV2R series double vane pump is a high-pressure double-displacement vane pump widely used in the fields of industry and machinery manufacturing. This series of vane hydraulic pumps is designed for occasions where two actions need to be performed simultaneously in the hydraulic circuit. It has the advantages of single oil suction port, saving pipelines, easy use and cost reduction. This article will introduce the technical parameters and instructions for use of PV2R33-52-60 double vane pump in detail.
2. Technical Parameters
①PV2R33-52-60 double vane pump
Model Description:
PV2R33: Serial number.
52: The nominal displacement of the small displacement pump of this model of vane pump.
60: The nominal displacement of the largest displacement vane pump of this model.
Other parameters:
Maximum working pressure: 210 kgf/cm².
Speed range: 600～1800 rpm.
Theoretical displacement: 59.6 cm³/rev.
3. Instructions for Use
① Installation and debugging
Check the direction and speed range: Make sure the direction and speed range of the pump are suitable for the system requirements.
Check pressure and temperature: Make sure the operating pressure and temperature do not exceed the pump rating.
Check the oil: Make sure the oil used meets the requirements of the pump and avoid using oil with too high viscosity to avoid affecting the performance of the pump.
Installation location: Select a suitable installation location according to the system layout and pump model, and ensure the coaxiality of the pump and motor.
② Operation and maintenance
Regular inspection: Regularly check the operating status of the vane hydraulic pump, including direction, speed, pressure and temperature.
Cleaning and Filtration: Use oil filter to maintain the cleanliness of working oil and avoid solid particle contamination.
Maintenance and replacement: Perform necessary maintenance and replacement according to the pump maintenance cycle, including replacing seals, cleaning the oil tank, etc.
Note: Avoid unnecessary operations when the oil pump is running to avoid damaging the pump or affecting system performance.
③ Troubleshooting
Fault diagnosis: Perform fault diagnosis based on the operating status and abnormal phenomena of the hydraulic pump, such as vibration, noise, leakage, etc.
Troubleshooting: Take appropriate troubleshooting measures based on the cause of the fault, such as replacing damaged parts, adjusting system parameters, etc.
4. Summary
YUKEN PV2R series double vane pump is a hydraulic component with superior performance and convenient use. This article introduces the technical parameters and instructions of PV2R33-52-60 double vane pump in detail, hoping to help users better understand and use these products. During use, please be sure to comply with relevant regulations and precautions to ensure the safe and stable operation of the system.